Atop-technology SE5416A User manual Manual do Utilizador descarregar pdf (Página 60)

Atop Industrial Serial Device Server

SE5408A/SE5416A Series

User Manual V 1.0

Note: It is not possible to configure LAN1 or LAN2 when bridge mode is enabled. Please go to

the Bridge Settings instead.

6.5.2 DNS Settings

You can configure the DNS1 or DNS2 Server IP Address manually. Alternatively, if you enable

the DHCP option in “LAN 1 Settings”, SE5416A Series will retrieve the DNS server address

from the DHCP server automatically.

Operation: Main → [2]Networking → [3]DNS Settings

Figure 6.6

6.5.3 SNMP Settings

SE5416A Series allows the user to Enable or Disable the SNMP function. The changes will

become effective immediately. Basic SNMP configurations such as Read/Write Community,

SysName (System Name), SysLocation (System Location), SysContact (System Contact),

and SNMP Trap Server IP are supported.

Operation: Main → [2]Networking → [5]SNMP Settings

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 112 113

Sem comentários

Atop-technology SE5416A User manual Manual do Utilizador Página 60