Atop-technology SE5002D User manual Manual do Utilizador Página 1

SE5002D Serial Device Server User’s Manual v. 1.1 September 2012

Atop Serial Device Server SE5002D User Manual V. 1.1 Packaging The package should contain the following items, Table 1. 2, Table 1. 3. Table 1.

Atop Serial Device Server SE5002D User Manual V. 1.1 1.2 Application Connectivity 1.2.1 TCP Server Mode SE5002D can be configured as a TCP server

Atop Serial Device Server SE5002D User Manual V. 1.1 1.2.2 TCP Client Mode SE5002D can be configured as a TCP client in TCP/IP Network to establish

Atop Serial Device Server SE5002D User Manual V. 1.1 1.2.3 UDP Mode UDP is a faster but connectionless network protocol. It does not guara

Atop Serial Device Server SE5002D User Manual V. 1.1 1.2.4 Tunneling Mode In the case that the serial device needs to communicate with e

Atop Serial Device Server SE5002D User Manual V. 1.1 2. Getting Started 2.1 Hardware: Panel Layout Fig. 2. 1 Fig. 2. 2

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 2. 3

Atop Serial Device Server SE5002D User Manual V. 1.1 2.2 Pin Assignments 2.2.1 Serial Port Fig. 2. 4

Atop Serial Device Server SE5002D User Manual V. 1.1 2.2.2 Ethernet port  Category 5 UTP Ethernet cable Fig. 2. 5  RJ45 Fig. 2. 6 2.2.3 RJ

Atop Serial Device Server SE5002D User Manual V. 1.1 2.3 Buzzer “^” Beep twice “=” Beep off Table 2. 2 Message Description ^===^===^===^===^===^=

Atop Serial Device Server SE5002D User Manual V. 1.1 Important Announcement The information contained in this document is the property of Atop Techn

Atop Serial Device Server SE5002D User Manual V. 1.1 3. Software Setup SE5002D Serial device server is shipped with default settings shown in the f

Atop Serial Device Server SE5002D User Manual V. 1.1 3.1 Configuration by Serial Manager SE5002D could be configured by Serial Manager, for

Atop Serial Device Server SE5002D User Manual V. 1.1  After verifying the password, the following terminal screen appears, Fig. 3. 2. Fig. 3. 2

Atop Serial Device Server SE5002D User Manual V. 1.1  Select “1” from “Input choice and enter (0~5):” to enter “Overview”, Fig. 3. 3. Fig. 3. 3

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.2 Networking  Select “2” from “Input choice and enter (0~5):” to enter Networking page a

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.3 Change the Password Select “3” from “Input choice and enter (0~5):” the following screen

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.5 Configure SE5002D as a TCP server Fig. 3. 7  Type 1 (Link Mode) from “Input choice an

Atop Serial Device Server SE5002D User Manual V. 1.1 To Enable IP filter:  Input y in the “Do one want to enable IP filter (y/n)?” to enable IP fi

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.6 Configure SE5002D as a TCP Client Fig. 3. 8  Type 2 in the “Input choice (1~5) and e

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.7 Configure SE5002D as a UDP UDP is a connectionless protocol. It is faster than TCP, but

Atop Serial Device Server SE5002D User Manual V. 1.1 Table of Contents Preface ...

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.8 Enable/Disable Virtual COM Enable or disable Virtual COM on this page. For more infor

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.9 Enable/Disable Pair Connection Enable or disable “Pair Connection” on this page. For m

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.10 COM Port Setting Type 2 from “Input choice and enter (0~5):” of COM1, the following scre

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.11 Emptying Serial Buffer Fig. 3. 13 If you want to empty the Serial buffer while the

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.12 Setting Packet Delimiter Packet delimiter is a way for packaging serial data. I

Atop Serial Device Server SE5002D User Manual V. 1.1 Another kind is character delimiter. If the character delimiter is set to 0x0d, th

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.13 Accept Control Command from COM port SE5002D can also accept serial control commands (RF

Atop Serial Device Server SE5002D User Manual V. 1.1 3.3 Configuration Using Web Browser  Make sure the PC is located in the same network sub-net

Atop Serial Device Server SE5002D User Manual V. 1.1  The following overview page should show. Click on the links on the left to go

Atop Serial Device Server SE5002D User Manual V. 1.1 3.3.2 Networking Setup Configure IP, SNMP, and alert settings on this page. Please fill in t

Atop Serial Device Server SE5002D User Manual V. 1.1 3.2.5 Configure SE5002D as a TCP server ... 26 3.2.6 Configure

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 3. 20 After all the settings are entered, please click on the “Save Configuration” butto

Atop Serial Device Server SE5002D User Manual V. 1.1 3.3.3 Security Setup Change the login password on this page, Fig. 3. 21. Fig. 3. 21 Ple

Atop Serial Device Server SE5002D User Manual V. 1.1 3.3.4 Backup EEPROM to Flash This backup function could recover settings from the Flash to the

Atop Serial Device Server SE5002D User Manual V. 1.1 3.4.1 TCP Server SE5002D is configured by default as TCP Server mode, there are add

Atop Serial Device Server SE5002D User Manual V. 1.1  Scroll to the bottom of the page and click on “Save Configuration” button to save the change

Atop Serial Device Server SE5002D User Manual V. 1.1 3.4.2 TCP Client By selecting the TCP Client mode, it means that a TCP Server program should b

Atop Serial Device Server SE5002D User Manual V. 1.1  Go to the Application Configuration section to apply Virtual COM, Pair Connection, or Reve

Atop Serial Device Server SE5002D User Manual V. 1.1 3.4.3 UDP SE5002D also supports connectionless UDP protocol in contrast to the connection-orie

Atop Serial Device Server SE5002D User Manual V. 1.1  Scroll to the bottom of the page and click on “Save Configuration” button to save the change

Atop Serial Device Server SE5002D User Manual V. 1.1 3.5 TCP Server Application 3.5.1 Enable Virtual COM SE5002D will encapsulate control packet

Atop Serial Device Server SE5002D User Manual V. 1.1 3.5.5 Multiple TCP Connections ... 53 3.5.6

Atop Serial Device Server SE5002D User Manual V. 1.1  Configure Virtual COM in your current OS. For Windows, refer to Using Virtual COM. Rememb

Atop Serial Device Server SE5002D User Manual V. 1.1  Check Enable Pair Connection to enable Pair Connection application in SE5002D.  Scroll t

Atop Serial Device Server SE5002D User Manual V. 1.1

Atop Serial Device Server SE5002D User Manual V. 1.1 3.5.5 Multiple TCP Connections To have more than one TCP Client connecting to SE5002D in TCP S

Atop Serial Device Server SE5002D User Manual V. 1.1 3.5.6 Multi-Point TCP Pair Connections The difference between Multi-Point TCP Pair Connection

Atop Serial Device Server SE5002D User Manual V. 1.1 3.6 TCP Client Application 3.6.1 Enable Virtual COM It is also possible to run Virtual COM

Atop Serial Device Server SE5002D User Manual V. 1.1 3.6.2 Enable RFC 2217 The underlying protocol of Virtual COM is based on RFC 2217, the Telne

Atop Serial Device Server SE5002D User Manual V. 1.1  Follow Sec 3.2.6 to configure SE5002D in TCP Client mode properly.  Check Enable Pair Co

Atop Serial Device Server SE5002D User Manual V. 1.1 3.7 UDP Application: Multi-Point Pair Connection It is also possible to setup a pair

Atop Serial Device Server SE5002D User Manual V. 1.1 Sample Configurations Table 3. 3 IP Address Link Mode Local Listening Port Destination IP Des

Atop Serial Device Server SE5002D User Manual V. 1.1 4.6 Using Serial/IP with a Proxy Server ... 79 5.

Atop Serial Device Server SE5002D User Manual V. 1.1 3.7.1 COM Configuration Configure serial settings in this page, Fig. 3. 35. Note that these

Atop Serial Device Server SE5002D User Manual V. 1.1  Flow Control, Choose between No Flow Control, RTS/CTS (Hardware Flow Control), DTR/DSR, Xon

Atop Serial Device Server SE5002D User Manual V. 1.1 4. Using Virtual COM Virtual COM allows remote access of serial devices over TCP/IP networks t

Atop Serial Device Server SE5002D User Manual V. 1.1 4.1.2 Limitation The Virtual COM driver allows up to 256 Virtual COM ports in a single PC.

Atop Serial Device Server SE5002D User Manual V. 1.1 4.2 Virtual COM 4.2.1 Enable Virtual COM in Serial Device Servers Enable Virtual COM in our

Atop Serial Device Server SE5002D User Manual V. 1.1 4.2.2 Running Serial/IP in Windows Find the Serial/IP Control Panel from:  Start→All program

Atop Serial Device Server SE5002D User Manual V. 1.1 After at least one Virtual COM port is selected, the Control Panel will show, Fig. 4. 5. Fig.

Atop Serial Device Server SE5002D User Manual V. 1.1 4.3 Configuring Virtual COM Ports To Configure Virtual COM ports (Fig. 4. 5),  If the ser

Atop Serial Device Server SE5002D User Manual V. 1.1  Enable Restore Failed Connections to force Virtual COM to automatically restore failed conn

Atop Serial Device Server SE5002D User Manual V. 1.1 4.3.1 Exceptions Fig. 4. 8  If the exclamation mark begins with Warning: timeout trying x

Atop Serial Device Server SE5002D User Manual V. 1.1 Preface Purpose of the Manual This manual supports you during the installation and configuring

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 4. 9  If there is a check with Raw Connection Detected and an exclamation mark with Cl

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 4. 10  If there is a check with Telnet Protocol Detected and an exclamation mark with

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 4. 11  If the exclamation mark begins with Server requires username/password login (Fi

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 4. 12  If the exclamation mark begins with Username and/or password incorrect (Fig. 4.

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 4. 13  If the exclamation mark begins with No login/password prompts received from ser

Atop Serial Device Server SE5002D User Manual V. 1.1 4.4 Using Serial/IP port Monitor 4.4.1 Opening the Port Monitor The Serial/IP Port Monitor

Atop Serial Device Server SE5002D User Manual V. 1.1 4.4.3 The Trace Panel Fig. 4. 15 The Trace panel provides a detailed, time-stamped, real-t

Atop Serial Device Server SE5002D User Manual V. 1.1 4.5 Serial/IP Advanced Settings In the Serial/IP Control Panel, Click on the Advanced

Atop Serial Device Server SE5002D User Manual V. 1.1 that is in effect for the Virtual COM port.  Include Domain in Windows Creditentials; if cr

Atop Serial Device Server SE5002D User Manual V. 1.1 4.6 Using Serial/IP with a Proxy Server The Serial/IP Redirector supports TCP network co

Atop Serial Device Server SE5002D User Manual V. 1.1 FCC WARNING Class A for Serial Device Server (Model SE5002D) This equipment has been tested a

Atop Serial Device Server SE5002D User Manual V. 1.1 5. Diagnostics There are several ways to check the status and availability of a serial device

Atop Serial Device Server SE5002D User Manual V. 1.1 Using Serial Manager Configuration Utility Use the Serial Manager configuration utility that co

Atop Serial Device Server SE5002D User Manual V. 1.1 6. Specifications Table 6. 1 SE5002D Specifications Network Interface Fiber Optics 802.3u 100

Atop Serial Device Server SE5002D User Manual V. 1.1 Software Protocols IPv4, ICMP, TCP, UDP, DHCP Client, SNMP, HTTP, Telnet, RFC2217 Configuration

Atop Serial Device Server SE5002D User Manual V. 1.1 Appendix Upgrade System Firmware Firmware is available for download from our Atop website. S

Atop Serial Device Server SE5002D User Manual V. 1.1  Press any key to continue.  An editor will open dapdl.cfg automatically. Edit the conten

Atop Serial Device Server SE5002D User Manual V. 1.1 Fig. 3  Repeat the above process again for kernels or AP firmware if necessary. Note: aft

Atop Serial Device Server SE5002D User Manual V. 1.1 Emergency Firmware Recovery The AP (application program) firmware for SE5002D can be disabled

Atop Serial Device Server SE5002D User Manual V. 1.1 1. Introduction 1.1 Product Overview The SE5002D Ethernet Serial device server acts as a gate